The tooth is the terminal of the excavator working device. During the excavation operation, the tooth is the most loaded working part, which is a consumable part, especially in the stone construction environment, the tooth wear speed is extremely fast. The use of the teeth is good or bad, in fact, it can directly affect the work efficiency and production cost of the excavator.
When the tip end portion of the tooth is worn more seriously, the force required for the excavator to cut in during the excavation work is inevitably greatly increased, thereby generating greater fuel consumption and affecting work efficiency. Therefore, when it is checked that the tooth loss is serious, it is necessary to replace the new tooth in time.
In the daily maintenance work of the excavator, spend 2 minutes a day to check the bucket. The main inspection contents are: the bucket body is worn and cracked. If the degree of wear is serious, reinforcement should be considered. As for the crack of the bucket body, it should be repaired in time to avoid the length of the crack due to delayed maintenance, resulting in unmaintainable conditions. In addition, the bucket teeth should be kicked with the foot to check whether the bucket is stable. If the bucket is loose, it should be tightened immediately. After reinforcement, the service life of the teeth can be extended by nearly 20-30%.
Therefore, checking the teeth every day before starting the excavator helps to avoid the tooth breakage, and also helps to save costs and save time. After cracks are found, in addition to reinforcement, new spare parts should be purchased immediately to prevent quick replacement after breaking.
https://www.casoki.com/wp-content/uploads/2019/01/bucket-teeth-service-life.png273710Carsohttps://www.casoki.com/wp-content/uploads/2019/01/casoki.pngCarso2019-01-24 10:35:382019-04-02 21:41:241 Tips ,extend the bucket teeth service life