HPT Multi-cylinder Hydraulic Cone Crusher

Higher crushing ratio, larger processing capacity, better granularity and shape of finished materials

Based on the structure of traditional multi-cylinder hydraulic cone crusher with the fixed main shaft and the eccentric bushrotating around the main shaft, and the laminating crushing principle,ZENITH greatly optimizes the structure of HPT Multi-cylinder Hydraulic Cone Crusher, which greatly improves the performance and crushing capability. Meanwhile, the hydraulic lubrication system of HPT Cone Crusher ensures more intelligent and more stable operation.

Materials:Granite, diabase, basalt, pebble, limestone, dolomite, metallic ores and non-metallic ores, etc.

Product Advantages

HPT Hydraulic Cone Crusher applies advanced PLC electrical system, which can continuously monitor the crusher and provide alarms to display various operating parameters.

HPT Cone Crusher optimizes the transmission parts and the lubrication and sealing structure. It has strong holding capacity, larger crushing power, higher efficiency yet lower noises.

HPT Cone Crusher adopts the laminating crushing principle to crush materials. The final products are cubical and of high content of fine powder.

HPT Cone Crusher is equipped with several crushing cavities. Operators can freely make choices among different cavities by changing only a few spare parts like the lining plate.

Working Principle of HPT Cone Crusher

When the HPT Hydraulic Cone Crusher is working, the motor drives the transmission shaft rolling through the pulley and the V-belt. The transmission shaft drives the eccentric bush rolling around the main shaft through the large and small bevel gears.The eccentric bush drives the moving cone to do the swing motion, to make the moving cone sometimes close to and sometimes far from the concave. Then the materials are impacted, extruded constantly in the crushing cavity formed by concave and mantle and then are crushed and the broken materials are discharged from the lower port.

Parameters

Model Cavities Feed opening (mm) Minimum discharging size (mm) Capacities (t/h) Maximum installed power (kW) Overall dimension (mm)
HPT100 C1(Extra Coarse) 140 19 75-140 90 1705×1510×1583
C2(Coarse) 100 13 60-110
M(Medium) 70 9 52-100
F1(Fine) 50 9 50-95
F2(Extra Fine) 20 6 45-90
HPT200 C2(Coarse) 185 19 145-250 160 2135×1750×1927
M(Medium) 125 16 135-235
F1(Fine) 95 13 115-220
F2(Extra Fine) 75 10 90-190
HPT300 C1(Extra Coarse) 230 25 220-440 250 2725×2110×2871
C2(Coarse) 210 19 190-380
M(Medium) 150 16 175-320
F1(Fine) 105 13 145-280
F2(Extra Fine) 80 10 110-240
HPT400 C1(Extra Coarse) 295 30 300-630 315 2775×2370×2295
C2(Coarse) 251 25 285-560
M(Medium) 196 20 250-490
F1(Fine) 110 13 180-345
F2(Extra Fine) 90 10 135-320
HPT500 C1(Extra Coarse) 330 38 425-790 400 2800×3480×4050
C2(Coarse) 290 30 370-700
M(Medium) 210 22 330-605
F1(Fine) 135 16 270-535
F2(Extra Fine) 95 13 220-430
HPT800 C1(Extra Coarse) 350 38 570-1200 630 3970×3345×4235
C2(Coarse) 299 32 520-1050
M(Medium) 265 25 475-950
F1(Fine) 220 16 370-800
F2(Extra Fine) 150 13 310-600

Related products